Lignin-based dual component additives as effective electrode material for energy management systems.

A functional PbO-lignin electrode hydrid material composite was designed and manufactured. Moreover, its connection efficiency was confirmed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). We noted that the superficial layers of PbO combined with layers of the biopolymer and that oxygen atoms present in both materials had influence on the chemical environment of the neighboring compound. Hence, it can be said that the addition of PbO significantly contributes to the improvement of thermal stability of the final inorganic-organic system. In the framework of the study, the dispersive, morphological and structural characteristics were determined using scanning electron microscopy (SEM) and laser diffraction method. Electrochemical studies indicated that the PbO-lignin material exhibits better electrochemical properties compared to PbO without the addition of kraft lignin (increased capacitance, lower charge transfer resistance), as the specific capacitance after 5000 charge/discharge cycles was still at 95% of the initial value. Such promising operating parameters show that this material can be successfully used as an electrode material for energy management systems.

Kraft lignin/cubic boron nitride hybrid materials as functional components for abrasive tools.

In this study, the kraft lignin/cubic boron nitride hybrid materials have been obtained and characterized for the first time. The effectiveness of the combination of lignin and boron nitride was evaluated on the basis of Fourier transform infrared spectroscopy. Furthermore, it was confirmed that the addition of cubic boron nitride (cBN) improved the thermal stability of the inorganic-organic material. Upswing in thermal properties allowed to apply the prepared materials in preparation of model abrasive composites. Beneficial influence of the lignin/cBN filler was also proven by a noticeable decrease in the amount of harmful phenol released from the compositions during headspace gas chromatography analysis. Mechanical properties of the lignin/boron nitride hybrids and resin systems were investigated by the three-point flexural test. The obtained results show that the used additives can be promising materials for abrasive tools combining the good properties of lignin as a plasticizer and of cubic boron nitride as a filler which improves the thermal and mechanical properties of finished products and, at the same time, limits the negative impact on human health and environment.

Catalyst-free activation of kraft lignin in air using hydrogen sulfate ionic liquids.

In this research we use ionic liquids in combination with mild process conditions to provide a selective increase in the content of carbonyl groups in the kraft lignin structure. Such modification can improve the properties of the pristine biopolymer. In this study, aromatic substituted ionic liquids were synthesized using [C4C1Im][HSO4] as a template structure. The substituents were intended to increase the affinity of the ionic liquid to the aromatic structure of kraft lignin, and to increase access to the oxidizing agent, which was atmospheric oxygen. [Benzyl(C2OC1)Im][HSO4] and [benzylC4Im][HSO4] activate the surface of the biopolymer more effectively than [C4C1Im][HSO4]. This was confirmed based on X-ray photoelectron spectroscopy, which showed the content of CO groups to be almost doubled compared with unmodified lignin. The analysis also revealed targeting of the hydroxyl groups of lignin to the carboxyl groups during activation in [C4C1Im][HSO4].

Development of Acidic Imidazolium Ionic Liquids for Activation of Kraft Lignin by Controlled Oxidation: Comprehensive Evaluation and Practical Utility.

A novel, eco-friendly method for the activation of lignin by controlled oxidation was studied. The results obtained for six acidic imidazolium ionic liquids containing the hydrogen sulfate anion were compared. The key goal of this research was to increase the content of carbonyl groups in the lignin structure because these may play the main role in the transport of protons and electrons in active materials for electrochemical applications. By means of a variety of analytical techniques (FTIR, 13 C CP/MAS NMR, and X-ray photoelectron spectroscopy; selected reactions to determine the presence of carbonyl groups; SEM; zeta-potential analysis; thermogravimetric analysis/differential thermogravimetric analysis; and porous structure analysis), it was determined that the product obtained after treatment with 3-cyclohexyloxymethy-1-methylimidazolium hydrogen sulfate had favorable properties, in terms of the target application. Electrochemical tests proved that the obtained materials could be used as anodes in lithium batteries. The results show that the activation of lignin with ionic liquids can increase its capacity and maintain stability.

Functional Hybrid Materials Based on Manganese Dioxide and Lignin Activated by Ionic Liquids and Their Application in the Production of Lithium Ion Batteries.

Kraft lignin (KL) was activated using selected ionic liquids (ILs). The activated form of the biopolymer, due to the presence of carbonyl groups, can be used in electrochemical tests. To increase the application potential of the system in electrochemistry, activated lignin forms were combined with manganese dioxide, and the most important physicochemical and morphological-microstructural properties of the novel, functional hybrid systems were determined using Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), scanning electron microscopy (SEM), zeta potential analysis, thermal stability (TGA/DTG) and porous structure analysis. An investigation was also made of the practical application of the hybrid materials in the production of lithium ion batteries. The capacity of the anode (MnO2/activated lignin), working at a low current regime of 50 mA·g-1, was ca. 610 mAh·g-1, while a current of 1000 mA·g-1 resulted in a capacity of 570 mAh·g-1. Superior cyclic stability and rate capability indicate that this may be a promising electrode material for use in high-performance lithium ion batteries.

Physicochemical Characterization of Functional Lignin-Silica Hybrid Fillers for Potential Application in Abrasive Tools.

Functional lignin-SiO2 hybrid fillers were prepared for potential application in binders for phenolic resins, and their chemical structure was characterized. The properties of these fillers and of composites obtained from them with phenolic resin were compared with those of systems with lignin or silica alone. The chemical structure of the materials was investigated by Fourier transform infrared spectroscopy (FT-IR) and carbon-13 nuclear magnetic resonance spectroscopy (13C CP MAS NMR). The thermal stability of the new functional fillers was examined by thermogravimetric analysis-mass spectrometry (TG-MS). Thermo-mechanical properties of the lignin-silica hybrids and resin systems were investigated by dynamic mechanical thermal analysis (DMTA). The DMTA results showed that abrasive composites with lignin-SiO2 fillers have better thermo-mechanical properties than systems with silica alone. Thus, fillers based on lignin might provide new, promising properties for the abrasive industry, combining the good properties of lignin as a plasticizer and of silica as a filler improving mechanical properties.